Parr-instrument HTM Manuale Utente Scaricare il pdf

Installation Instructions for

High Temperature Cut-Off Module (HTM)

557M

Meter Installation in 4848 Reactor

Controller

1. Unplug the power cord of the 4848 Controller.

Remove the (2) screws located on the top/front

cover at the rear corners of the controller. Gen-

tly lift the cover forward, which is hinged at the

bottom, taking care not to apply tension on any

internal wiring.

2. If applicable, remove and discard the black hole

plug on the sloped front panel above the “TEM-

PERATURE” text. This can be done by pinching

the clasps on the back of the plug from the inside

of the front plate.

3. Insert the meter (2082E) through the panel cut-

out, from outside in, making sure the rubber

gasket is on the outside of the controller front

panel. (If wires are preinstalled, remove the

terminal connector by releasing the tabs on the

sides of the module and gently pulling the termi-

nal connector off. Reference photos below.) Slide

the white mounting bracket onto the module with

the mounting screws pointing towards the front

panel. Slide the mounting bracket forward until

it touches the controller panel. The clasps on the

mounting bracket should align with the groves

on the module. Gently tighten the screws until

the module is held into place. (If removed, reat-

tach the terminal connector.)

Terminal Connector Removal

1 2 3 4

Sommario

Pagina 1 - Controller

Installation Instructions for High Temperature Cut-Off Module (HTM)557MMeter Installation in 4848 Reactor Controller1. Unplug the power cord of the 4

Pagina 2 - HTM Installation

HTM InstallationParr Instrument Company27 8 9 10 11 121 2 3 4 5 62082E Pin Out(Pin 5 is blank)Meter Installation in 4848 Reactor Controller (Continued

Pagina 3

HTM Installationwww.parrinst.com3Wiring Installation in 4848 Reactor ControllerWarning: Take care not to apply too much torque when tightening down o

Pagina 4 - High Temperature Module - HTM

High Temperature Module - HTMKeys command:1. Press “SET” to select 2. Press return key move to next operation mode3. Up/Down arrow keys to adjust v

Più documenti per Sensori Parr-instrument HTM

Per vedere il documento Parr-instrument HTM Manuale Utente

Parr-instrument HTM Manuale Utente (8 pagine)

Commenti su questo manuale

Nessun commento

Parr-instrument HTM Manuale Utente

Navigare online o scaricare Manuale Utente per Sensori Parr-instrument HTM. Parr Instrument HTM User Manual Manuale Utente

Sommario

Più documenti per Sensori Parr-instrument HTM

Commenti su questo manuale

Prodotti e manuali riguardandi Sensori Parr-instrument HTM